Show cover of Concrete Injection Made Easy

Concrete Injection Made Easy

Tune in to the Concrete Injection Made Easy podcast, where your host Mateusz Furs shares his experience on injection technology and helps you get ahead of the curve with your business. Discover how to pick and adjust the right resin or pump to the job to get the best, watertight seal on cracks and expansion joints…and expand your customer base. Since 2010, Mateusz has worked in the concrete repair industry both as a product manager and as an owner-operator of contracting company in Warsaw, Poland. In 2017, he started a blog on injection technologies and water tightening solutions like curtains, horizontal and vertical insulation, selection of suitable grouts, pumps, and packers. In the podcast and on his blog, he talks about the injection technology in concrete, masonry, walls of concrete blocks, and stone as well as techniques for stopping groundwater outflow. He also dives into the principles of destruction by moisture and salts—and what can be done to prevent it. He shares his experience of soil stabilization, lifting concrete and making resin diaphragms in the ground, so that you can apply the same techniques in your business. It's a mix of solo shows and interviews from Mateusz, you're not going to want to miss. Hit subscribe and take your injection business to new heights.


Injection Grouting, Marketing and a Geek 58:36 26.05.2021
Range of all injection applications #23 11:15 20.05.2021
The commandment of need in the concrete injection industry based on The Millionaire Fastlane by M. J. DeMarco 12:34 06.05.2021
Concrete Injection Drilling Calculator 36:41 29.04.2021
Advantages of an Injection Test Field with Stephan Delarue 47:11 22.04.2021
019 How to run a construction company with Jens Bögershausen 52:30 15.12.2020
Taking over the job site - crack re-injection 32:10 02.12.2020
Forum on Injection Technology 2020+1 on the podcast 28:12 18.11.2020
These 7 questions (and answers) will increase the effectiveness of remedial injection 16:47 05.11.2020
How to seal the dilatation of the tank without entering it? 45:58 21.10.2020
Epoxy vs. Polyurethane Concrete Crack Injection - how to choose? 22:29 07.10.2020
Anton Vorek DESOI Koester Mabi on COVID, market, and the future of the injection industry 28:52 21.09.2020
Crack Injection episode #012 Q&A 1st Webinar 42:50 09.09.2020
Taking the ‘Voodoo’ Out of Concrete Injection With Chris Coderre from SealBoss 52:36 25.08.2020
How a Growth Mindset Is Key to Boosting Your Concrete Injection Business 60:35 12.08.2020
When Using Injection Rubber Is a Way Better Choice Than Acrylic Gel 53:27 29.07.2020
Expand Your Leak Sealing Business Into Concrete Slab Lifting 50:08 13.07.2020
Concrete injection training - Tradecc's Academy 45:21 27.06.2020
Acrylic gels for leak-sealing and more with Brice Diochon at SNF 49:32 15.06.2020
Concrete motorway safety barriers 40:50 03.06.2020
Sealing Expansion Joints with Dennis Wagner of Normet 44:55 20.05.2020
Decoding the PU based injection resins with Stephan Delarue from Webac 45:28 25.04.2020
Why the watertight business will not go away with Nick Chittenden from BASF 53:29 24.04.2020
Concrete Injection Made Easy podcast - Introduction 08:22 23.04.2020